|
|
|
Theory to Practical (T2P) Club | |
MINUTES OF THE T2P CLUB MEETING
|
NAME OF THE MEETING: T2P CLUB INAUGURATION
|
DATE:26/09/07
|
|
NAME OF THE CHIEF MENTOR: Prof. TOMY JOSEPH
|
TIME:11:55-12.50
|
|
MEETING TYPE: SCHEDULED
|
VENUE: CCB206
|
|
ATTENDEES STAFF
|
|
1.Mr.AJITHKUMAR JP 4.Mr.JOSHI
2.Mr.RENOLD 5.Mr.RENJITH
3.Mr.SREEJITH 6.Mr.BALACHANDREN
7.Mr.RAMAN
|
|
ATTENDEES STUDENTS
|
|
S7-10 Members
S1&S2-8 Members
|
|
AGENDA
|
|
>Introduction by chief mentor about the club activities
>Selection of the office bearers
>Proposal and feedback from students
|
|
SUGGESTED ACTIVITIES
|
|
>Devising maps and model of the college
>Photographing and modeling of the machines
>installing water level indicator
|
|
DECISION
|
|
>Mr. Soji joy of S7 Mechanical Engineering was selected unanimously as president of the club
>Vice president and secretary were not selected due to the absence of S5 students thanks to university practical examinations.
>Mr. Swen Thomas of S1&S2 Mechanical Engineering was selected unanimously as joint secretary of the club.
>Selection of committee members was postponded due to the absence of S5 students.
>Power point presentation and drawings about the club activities were invited.
>Division of students into various groups.
|
|
Prepared by :Ajithkumar J P(for club secretary)
Reviewed by : Chief mentor
|
| |
|
NAME OF THE MEETING: T2P CLUB MEETING
|
DATE:10/10/07
|
|
NAME OF THE CHIEF MENTOR: Prof. TOMY JOSEPH
|
TIME:11:55-12.50
|
|
MEETING TYPE: SCHEDULED
|
VENUE: CCB207
|
|
ATTENDEES STAFF
|
|
1.Mr.AJITHKUMAR JP
2.Mr.SHERIN SAM JOSE
3. Mr.RENOLD
4.Mr.SREEJITH
|
|
ATTENDEES STUDENTS
|
|
S7-7 Members
S5-30 Members
S3-7 Members
S1&S2-13Members
|
|
AGENDA
|
|
>Selection of secretary and vice president
>Division of students into various groups for active participation
>Assigning works to each group
|
|
SUGGESTED ACTIVITIES
|
|
ACTIVITY HEAD IN CHARGE
1.Sheet and metal work : Saji Joy S7 ME
2.Animation and slide presentation :Sreeraj P R S7 ME
3.Model presentation :Godwin George S7 ME
4.Preparation oof sign boards :Ratheesh S S7 ME
5.Welding :Vivek K R S7 ME
6.Preparation of drawing :Tittu C Baby S7 ME
|
|
DECISION
|
|
>Mr.Mathews Philip of S5 ME was selected unanimously as president of the club.
>Mr.Bharat Balaji of S3 ME was selected unanimously as vice president of the club.
|
|
Prepared by :Mr.Mathews Philip (club secretary)
|
|
Reviewed by : Chief mentor
|
| |
|
NAME OF THE MEETING: T2P CLUB MEETING
|
DATE:17/10/07
|
|
NAME OF THE CHIEF MENTOR: Prof. TOMY JOSEPH
|
TIME:11:55-12.50
|
|
MEETING TYPE: SCHEDULED
|
VENUE: CCB207
|
|
ATTENDEES STAFF
|
|
1.Mr.AJITHKUMAR JP 5.Mr.JOSHI
2.Mr.SHERIN SAM JOSE 6.Mr.BALACHANDREN
3. Mr.RENOLD 7.Prof TOMY JOSEPH
4.Mr.SREEJITH
|
|
ATTENDEES STUDENTS
|
|
S7-3 Members
S5-30 Members
S3-0 Members
S1&S2-8Members
|
|
AGENDA
|
|
>Presentation of slides and animation.
>Starting of sheet metal and welding session for group 1 and group 5 respectively.
>Model presentation by group 3.
|
|
ACTIVITIES
|
|
>Group 2 under SREERAJ P R presented an animation of working of a six stroke engine and explained its working, advantages etc.
>A questioning session was was carried out after the presentation and the students doubts were cleared
>Group 4 under GODWIN GEORGE studied safety precautions for workshop activities especially during welding session.
|
|
DECISION
|
|
>Group 4 members decided to get necessary information on sign board design from internet and other references.
>Group 6 members decided to show pictures of mechanical machines and also some animations.
|
|
Prepared by :Mr.Mathews Philip (club secretary)
|
|
Reviewed by : Chief mentor
|
| |
|
NAME OF THE MEETING: T2P CLUB MEETING
|
DATE:31/10/07
|
|
NAME OF THE CHIEF MENTOR: Prof. TOMY JOSEPH
|
TIME:11:55-12.50
|
|
MEETING TYPE: SCHEDULED
|
VENUE: CCB207
|
|
ATTENDEES STAFF
|
|
1.Mr.AJITHKUMAR JP 5.Mr.JOSHI
2.Mr.A N RAMAN 6.Mr.BALACHANDREN
3. Mr.RENOLD
4.Mr.SREEJITH
|
|
ATTENDEES STUDENTS
|
|
S7-5 Members
S5-26 Members
S3-1 Members
S1&S2-8Members
|
|
AGENDA
|
|
>Model presentation
>Preparation of drawing for sheet metal work and starting of welding.
>Analysis of progress of each group in their field.
>Picture presentation.
|
|
ACTIVITIES
|
|
>Mr.SREENATH.P.POLACKAL presented a model on 'MAY FLOWER ENGINE' and explained its theory and working.
>During the question hour he explained its advantage over conventional engine and its application.
>Drawing was prepared for sheet metal work.
>Welding practice was started under the guidance of the lab instructors.
|
|
DECISION
|
|
>Presentation of more models in the coming session.
>Sheet metal cutting in the next class.
>Preparation and installation of sign board.
|
|
Prepared by :Mr.Mathews Philip (club secretary)
|
|
Reviewed by : Chief mentor
|
| |
|
NAME OF THE MEETING: T2P CLUB MEETING
|
DATE:7/11/07
|
|
NAME OF THE CHIEF MENTOR: Prof. TOMY JOSEPH
|
TIME:11:55-12.50
|
|
MEETING TYPE: SCHEDULED
|
VENUE: CCB207
|
|
ATTENDEES STAFF
|
|
1.Mr.SHERIN SAM JOSE
2. Mr.RENOLD
3.Mr.SREEJITH
|
|
ATTENDEES STUDENTS
|
|
S7-0 Members
S5-28 Members
S3-1 Members
S1&S2-10Members
|
|
AGENDA
|
|
>Welding practice for more students.
> Continuation of sheet metal work.
|
|
ACTIVITIES
|
|
>Welding practice was given to 1st year students.
>A question on orthographic projection was put forward by Mr.SREENATH.P.POLACKAL and its solution was obtained after showing its model.
|
|
DECISION
|
|
>Completion of sheet metal work at the earliest.
>More welding practices in coming sessions.
|
|
Prepared by :Mr.Mathews Philip (club secretary)
|
|
Reviewed by : Chief mentor
|
| |
|
NAME OF THE MEETING: T2P CLUB MEETING
|
DATE:6/02/08
|
|
NAME OF THE CHIEF MENTOR: Prof. TOMY JOSEPH
|
TIME:11:55-12.50
|
|
MEETING TYPE: SCHEDULED
|
VENUE: CCB207
|
|
ATTENDEES STAFF
|
|
1.Mr.AJITHKUMAR J P 4.Mr.BALACHANDRAN
2. Mr.RENOLD 5. Mr.A N RAMAN
3.Mr.JOSHI
|
|
ATTENDEES STUDENTS
|
|
S8-0 Members
S6-28 Members
S4-0 Members
S1&S2-10Members
|
|
AGENDA
|
|
>Practice on lathe milling machine and shaper.
|
|
ACTIVITIES
|
|
>Basic practice on lathe was given.
>Different part of the lathe was studied.
|
|
DECISION
|
|
>More practice on lathe shaper.
>Practice on drilling machine slotter machine.
|
|
Prepared by :Mr.Mathews Philip (club secretary)
|
|
Reviewed by : Chief mentor
|
| |
|
NAME OF THE MEETING: T2P CLUB MEETING
|
DATE:13/02/08
|
|
NAME OF THE CHIEF MENTOR: Prof. TOMY JOSEPH
|
TIME:11:55-12.50
|
|
MEETING TYPE: SCHEDULED
|
VENUE: CCB207
|
|
ATTENDEES STAFF
|
|
1.Mr.AJITHKUMAR J P 4.Mr.BALACHANDRAN
2. Mr.RENOLD JOSE 5. Mr.A N RAMAN
3.Mr.JOSHI
|
|
ATTENDEES STUDENTS
|
|
S8-0 Members
S6-0 Members
S4-1 Members
S1&S2-8Members
|
|
AGENDA
|
|
>Practice on lathe, milling machine and shaper.
|
|
ACTIVITIES
|
|
>Basic practice on lathe was given.
>Different part of the lathe was studied.
|
|
DECISION
|
|
>More practice on lathe shaper.
>Practice on drilling machine slotter machine.
|
|
Prepared by :Mr.Mathews Philip (club secretary)
|
|
| |
| | | |
